Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 99 / 416-
in SNMP Trap server.
z snmp user WORD {ro|rw} { auth|noauth|priv}
Use SNMPv3 authentication.
z snmp vacm { access|com2sec|group|view } OPTION
Use for the authentication by View-based Access Control Model (VACM). The usage is
not recommended to due to a difficult configuration in general
z
snmp port <1-65535>
Configure a port of SNMP Agent. The standard value is 161.
z snmp server
Enable SNMP agent
z show snmp
Displays SNMP configured settings.
[Usage Example] Configuring SNMP
model name# config terminal
model name(config)#
☞ SNMP Config is possible from this status
model name(config)# snmp community ADDPAC-Domain1 rw ☞
Configure community-string to exchange information with all the SNMP managers
which is in ADDPAC-Domain1.
model name(config)# snmp host 131.23.1.1 v2c ADDPAC-Domain
☞ Send Trap from 131.23.1.1 of SNMP Manager to SNMP v2C protocol as to set
the string to Add-Domain
model name(config)# snmp contact HongKilDong ☞ Set up the
contact information of SNMP MIB-II System Group
model name(config)# snmp location 9FlofBuilding4 ☞ Set up
the contact information of SNMP MIB-II System Group.
model name(config)# snmp name Tac_Gateway1 ☞ Set up the contact
information of SNMP MIB-II System Group
model name(config)# snmp enable-authtrap ☞ Configure the
command to inform to all the other managers, if one of the mangers tries to