Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 86 / 416-
Relaying packets transparently is similar to the bridge mode configuration. IP Share mode takes
only VoIP packet of its own among the packets, which arrive on the determined destination on
the network side interface. On the other hand, Bridge mode delivers the rest of the packets
transparently, except those ones that are configured on the network interface side to arrive on
the destination. Configuring QoS is possible by using APOS commands for voice traffic priority
order control on LAN0 Ethernet 0/0 interface of the gateway accessing towards IP network.
Such QoS configuration for all the incoming data and voice data to LAN1 Ethernet1/0 VoIP
gateway supports maintaining the maximum voice quality through QoS provision for priority
order and bandwidth control.
As no change in the existing user’s environment is recommended basically, when the uplink
port is configured to PPPoE Client, configuring the local interface to PPP server is
recommended; when the uplink port is configured to DHCP client, configuring the local
interface to DHCP server; when the uplink is configured to Static IP, configuring the local
interface to Static IP as well is recommended.
[Usage Procedure]
Steps Workflow Description
1 Move top configuration mode.
2 Configure the feature by using ip connect.
3 Generally inside is configured to LAN (FastEthernet1/0).
4 Generally outside is configured to WAN (FastEthernet0/0)
Uplink interface (LAN 0) Local interface (LAN 1) Configurability
DHCP O
PPP O
DHCP
Static X
DHCP O
PPP O
PPP
Static X
DHCP O
PPP O
Static
Static O
Table 2.1 Configuration Chart for each Uplink Interface for VoIP Gateway
In APOS G2 version, when the uplink is static, the local interface is recommended to be static as