Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 82 / 416-
[Related Commands and Format]
z bridge-group <1-255>
This is the interface command to configure the interface to operate as Bridge Group . Please
configure the interface to be used for bridge. The same value is to be specified for connecting
to the same network
z frame-relay map bridge <dlci-number>
1. This is the interface command to configure Map, so Bridge Packet can be transmitted
through the interface when the interface being used for Bridge is Frame-Relay.
2. DLCI value is the range of 16~1007 numbers
3. When bridge is used to Frame-Relay interface, Map Command must be used to enable
Bridge
4. When Frame-Relay is not used, the function is not provided.
z bridge priority <priority-number>
1. This is the interface command option to determine the priority order for blocking or
forwarding when the interface is involved in Spanning Tree process.
2. The range of the value is 0~255, as the number gets smaller, the priority order gets
higher, the default value is 0.
z bridge path-cost <path-cost-value>
1. This is the interface command option to determine the priority order for blocking or
forwarding when the interface is involved in Spanning Tree process.
2. The range of the value is 0~65535, as the number gets smaller, the priority order gets
higher, the default value is Ethernet:100, Serial: 128
z bridge hello-time <hello-interval>
1. This is a global command option to determine Hello Interval between BPDU.
2. The range of value is 1~10 seconds by number, the default value is 2 seconds.
z bridge forward-time<forward-interval>
1. This is a global command option to determine Forward Delay Interval.
2. The range of value is 10~200 seconds by number, the default value is 30 seconds.