Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 78 / 416-
8
Check whether DHCP is configured correctly or not by using show
running-config
[Related Commands and Format]
Mandatory Commands
z dhcp {server/relay}
Enable DHCP of the gateway to operate as a server or DHCP Protocol Relay.
z ip dhcp relay
1. Change DHCP protocol of the gateway which is broadcast, to relay-ip-address
equipment, which is unicast
2. relay-IP-address: the IP address of the equipment which relays DHCP broadcast to
unicast message.
z ip dhcp pool <pool name>
1. Configure DHCP pool to operate as DHCP server
2. <subnet address><interface FastEthernet > : Specify the IP address or interface range of
DHCP pool.
z show running-config
Display the configured settings including DHCP
[Usage Procedure – DHCP Client]
Steps Workflow Description
1 Enter configuration mode
2 Choose the interface to be specified to DHCP Client
3 Specify the IP address of the interface to dhcp