Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 61 / 416-
properly.
z A case where network is small-size and its structure is not complicated, so configuring
static route is relatively easy and a packet that gives a load on the network, such as Route
Update Packet, is not desirable.
z A case where all the packets are to be sent to a specific next-hop address and destinations
of the packets are not displayed in a routing table by using default route (or gateway of last
resort).
Once static route is configured, the gateway recognizes it as so until the route is deleted. If you
want delete the route, you can use ‘no’ command.
Default route specifies the next path of the packet towards all the destinations that is not
displayed in the routing table as a kind of static route. Default route gets the lowest in priority
level of VoiceFinder Gateway.