Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 56 / 416-
gateway when the gateway is connected to PPP PAP/CHAP server.
2. This commend is same as the one for an administrator to register a login user. Only the
difference from the gateway user registration that the registered user’s level is not used
to connect to PPP even though the user registration is used for PPP connection.
3. In general, a function of adding user is not needed, because the network server
performs the authentication function in ADSL network environment.
z ppp ipcp { enable | default-router }
1. This is the command for configuring PPP IP address and default router settings from the
interface configuration
2. Set ipcp to enable/ default-router for IPv4 related settings in general
3. When other ipcp options are not configured, it operated on a value which is determined
by the system
z ppp ipv6cp { enable }
1. This is the command for PPP IPv6 and default router from the interface configuration.
2. Enable ipv6cp, which is IPv6 related configuration, only when it is used for IPv6
3. When other ipcp options are not configured, it operated on a value which is determined
by the system
z ppp authentication {chap/pap} [calling/{pap/chap}]
1. This is the command to configure ppp authentication mechanism to chap or pap for the
interface configuration.
2. This calling option is to connect only incoming call to chap authentication
3. {pap/chap} at the end is the option to respond to the calls requiring all chap/pap
authentication
z ppp chap hostname name
1. This command to configure PPP client device. When ppp chap is used to request for a
connection to the server, it registers a user’s name (an option for chap authentication)
2. When this command is not used, the gateway name is sent, as a basic value, to the user
name.
z ppp chap password password
This command is to configure ppp client device. When ppp chap authentication is used for