Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1

AddPac Technology Co., LTD

- 55 / 416-

[Usage Procedure]

Steps Workflow Description

1 Enter interface configuration mode

2 Enable PPPoE of the interface

3 Add PPP Encapsulation protocol to the interface

4 Enable CHAP or PAP Authentication (optional)

5 Configure the setting for CHAP/PAP Parameter (optional)

6 Configure the IP setting for PPP Default Peer IP (optional)

Check whether the gateway operate normally by using debug command

(when it is necessary)

8 Up the interface

Check whether the function operates normally on the interface by using

show interface command

10 Use debug command to find any failure and correct it (when it fails)

[Related Commands and Format]

z interface FastEthernet { 0 / 1 }/ { 0 / 1 }

Choose the interface to be configured, then enter interface configuration mode

z pppoe enable

Enable PPPoE

z pppoe-client local-interface

Assign the interface which is operated by PPPoE , to local

In general, using local interface is recommended.

z encapsulation ppp

Configure encapsulation mode for the interface to be used.

z username <username> password <password> {administrator/operator/user}

1. This is a command to set a login name and password for authorizing an access to the