Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1

AddPac Technology Co., LTD

- 43 / 416-

forward-digits Forward an incoming number arrived on the pots

huntstop Set hunting stop on this peer when call routing

inbound-pots-peer Set inbound pots peer when this peer call out

Cancels the pots peer command has been entered and

return to the default value

numbering-type Change a numbering type of pots peer

out-barred-group Set outbound call barred group for the pots

outbound-notify Set a beep sound for the outbound call

port Set a voice port binding to this pots

preference Set a precedence order for dial-peer hunt selection

prefix Set the prefix in pots peer configuration mode

quit Return to the previous mode

recording Configure a recording related information

shutdown Shut down pots peer

user-name Enter an authentication ID when to register

user-password

Enter a password for the authentication ID when to

url Set url type to tel type

display-name Display a name of the pots for SIP connection

to-display-name to-display-name of pots for SIP connection

translate-outgoing Configure a number translate rule for the outbound call

write Save the present configuration

2.2.5.4. Voip peer Commands

Entering dial-peer voice [0~65535] voip from global configuration mode changes the prompt to

model name (config-dialpeer-voip-1000)#.

Commands Description

answer-address

Use a calling party number of the inbound call to find the

voip peer call for an arriving VoIP inbound call on network

calling-pattern Set calling pattern to outbound call

clid Change CLID( Calling Line Identification) mode

codec Specify a static codec type