Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 42 / 416-
2.2.5.2.1. E1/T1 Controller Commands
E1/T1 controller configuration mode assigns a specific controller port from global
configuration mode, and then it does the settings. Depending on a model, the gateway can have
a number of E1/T1 ports.
Commands Description
chan-number-order Set an order for opening a channels for the incoming call
channel-group Organize a group of channels for use
clock-source Set to ISDN clock-source
end Return to the beginning mode (Exec)
exit Return to the previous mode
help Display APOS help
isdn Set ISDN related options
no
Cancels the command has been enters and return to a
default value
out-barred-group Set the channel group for blocking an outgoing call
quit Return to the previous mode
r2 Set R2 related options
signaling-type Select a signaling type from ISDN/DTMF/R2
write Save the present configuration
2.2.5.3. Pots peer Commands
The prompt changes to model name (config-dialpeer-pots-0)# after dial-peer voice [0~65535]
pots is entered from global configuration mode.
Commands Description
application Set pots to MGCP
call-waiting Enables call-waiting
destination-pattern Set a destination pattern
diversion Set a call diversion