Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 41 / 416-
caller-id Enable caller-id
clear-down-tone-detect Detect clear down tone
comfort-noise Enable comfort-noise to be generated
compand-type Set compand type (A-law or U-law)
connection Set connection plar
description Enter a description of the voice-port
dial-tone-generate Enable dial tone generation
did
Apply DID(Direct Inward Dialing) to a corresponding
voice-port
echo-cancel Enable echo cancelation
end Return to the beginning (exec)
exit Return to the previous mode
fax-early-detect Apply fax-early-detect to a corresponding voice-port
force-clear-down
Enable forced clear down on low level signal (FXO or
E&M)
help Display APOS help
high-dtmf-gain Set a high frequency dtmf gain value to DTMF tone
input Adjust input gain (volume) value
low-dtmf-gain Set a low frequency dtmf gain value to DTMF tone
no Cancel the entered command and return to default value
non-confirmed-connect Configure non-confirmed-connect from E&M module
output Adjust output gain (volume) value
polarity-inverse
Configure polarity-inverse settings (FXS : generate, FXO :
detect)
pstn-backup-port Configure peer PSTN(FXO) backup port settings
quit Return to the previous mode
ring ring cadence and frequency
shutdown Shut down the port
signal Set signal type
timeout Set timeout value
timing Set timing value
translate-incoming Set called/calling number translation-rule to the port
type Set E&M type
write Save the present configuration