Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 404 / 416-
[ Pinout of Ethernet Cable Assemble(RJ-45 to RJ-45)]
In order to connect the Gateway with other equipments (i.e. HUB), the RJ-45 to RJ-45 Ethernet
Cable is used. The RJ-45 Connector Pin sequence is provided in Diagram C-1 and the
transferred signal and Pinout specifications are enlisted in Table C-2 “Serial Ethernet Cable
Signal and Pinout”.
Figure C.1 10Base-T RJ-45 Connector
RJ-45 Signal Direction RJ-45 Pin
1
Tx + →
1
2
Tx - →
2
3
Rx + ←
3
4 - - 4
5 - - 5
6
Rx - ←
6
7 - - 7
8 - - 8
Table C.2 Signal and Pinout Serial Ethernet Cable
1. These specifications are for serial cables connecting the Gateway and the
HUB.
2. For Gateway to Gateway or Gateway to PC connection, the Cross Cable
must be used.