Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 403 / 416-
Appendix C. Cable Specifications
This Appendix provides information about the Pin-out specifications of the
following cables used with the AP6800 VoiceFinder Gateway .
z Console Port Signal and Pin-out(RJ-45 to DB9)
z Pin-out for UTP Cable (RJ-45 to RJ-45)
[ Console Port Signal and Pin-out ]
To connect console port of the router and the PC installed with terminal emulation software, use
RJ-45 to D89 (Female DTE connector) type:
Console Port
(DTE)
RJ-45 DB-9
Console Device
(PC)
Signal RJ-45 Pin DB-9 Pin Signal
RTS 1 8 CTS
DTR 2 6 DSR
TxD 3 2 RxD
GND 4 5 GND
GND 5 5 GND
RxD 6 3 TxD
DSR 7 4 DTR
CTS 8 7 RTS
Table C.1 Signal and Pinout of Console Port