Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 40 / 416-
local-ringback-tone Enable pseudo ring back tone
max-call
Set maximum number of call limit
max-frame Set maximum number of audio frames per Tx packet
minimize-voip-ports Minimize UDP/TCP port range using for VoIP
no Cancel the entered command and return to default value
modem Set modem passthrough
qos-threshold
Set threshold value of delay, jitter, packet loss for sending
SNMP trap
quit Exit current mode and down to previous mode
remote-log Configure remote syslog server for call logging
rtp-nat-pat Set RTP NAT/PAT configuration
security Set security parameters
hold-tone-play Set tone play for hold call
static-jitter-buffer Set static jitter buffer for RTP
timeout Set timeout value
timing Set timing value
translate-voip-incomin
g
Set number translation rule for VoIP incoming call
ttl-margin Set TTL (Time To Live) margine
voip-response-on-pstn Set VoIP response mode when call is on PSTN
write Save the present configuration
2.2.5.2. voice-port Commands
To enter voice-port configuration mode, use the voice-port command in global
configuration mode. Depending on the model, the gateway can have a number of
FXS/FXO/E1/T1/E&M ports.
Commands Description
announcement Enables a voice announcement of the voice-port
busyout
Configure an action of voice-port when the gateway is in
busyout status.