Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 393 / 416-
3.10.7.17. debug voip
To trace ASN.1 of VoIP related event, use debug voip command.
debug voip { h225-asn1 | h245-asn1 | ras-asn1 }
no debug voip { h225-asn1 | h245-asn1 | ras-asn1 }
3.10.7.17.1. Syntax
Keyword / Argument Description
h225-asn1. H.225 ASN.1 Event
h245-asn1 Traces H.245 ASN.1 Event
ras-asn1 Traces RAS ASN.1 Event
3.10.7.17.2. Command Default
No default behavior or value.
3.10.7.17.3. Command Modes
Administrator’s command
3.10.7.17.4. Usage Guidelines
This command traces the event of H.225 ASN.1, H.245 ASN.1 and RAS ASN.1 and displays
them on the console port. This command can slow down performance of the system. Therefore,
this feature must be disabled normally.
VoIP related messages and call tracing can be displayed on the console port. To see tracing by
telnet terminal from a remote location, use debug-port command in global command. Message
tracing is operated only one remote terminal, then the terminal, to which debug-port command s
used, is operated. If telnet is disconnected, tracing operates automatically on the console. To
display tracing on the console at default, use no debug-port command.
The message tracing with debug command give a lot of load to the gateway, this feature must be
disabled normally. When terminal is finished after tracing from telnet, without no debug or
undebug command, tracing can go through the console, so caution is required.
Information
Caution