Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 374 / 416-
3.10.6.34. accept-fst-at-connect
When H.323 cal is originated, its own ringback tone is played to the user side (FXS or FXO)
regardless of receiving alerting message.
When this feature is set up, OLC channels is not open for not sending from the remote equipment
to inband (RTP).
To delete application of this command, use the no form of this command.
accept-fst-at-connect
no accept-fst-at-connect
3.10.6.34.1. Syntax
Keyword / Argument Description
This command has no arguments or key words.
3.10.6.34.2. Command Default
Disabled
3.10.6.34.3. Command Modes
Voice service configuration
3.10.6.34.4. Usage Guidelines
To provide ringback tone to inband in general, repose message is used for progress message.
However, some equipment delivers a small number of RTP packets or silence to inband after
delivering response message to alerting.
In this case, the gateway plays its own ringback tone and tries to play the packets coming from
RTP. However, ringback tone can not be heard if it is silence and a very little RTP packet is
transmitted
By using this feature, ringback tone can heard if RTP packet, which comes prior to connect, is
ignored