Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 370 / 416-
3.10.6.31. timeout
To set VoIP related timer parameters, use timeout command in voice service configuration. To
return to the default state, use the no form of this command.
timeout { tinit | tring | t301 | t303 | tras | tttl | tidt | treg | treg2 | tohd | tpoll | tterm }
value
no timeout tinit | tring | t301 | t303 | tras | tttl | tidt | treg | treg2 | tohd | tpoll | tterm }
3.10.6.31.1. Syntax
Keyword / Argument Description
tinit value First digit entry to voice port after hook off. The value ranges
from 1 to 600, The default is 10.
tring value Time out value of ring generation to voice port. The value
ranges from 5 to 600, The default is 30. The unit is second.
t301 value Time out value starting from the point Q.931 message
received until CONNECT message is received. The value
ranges from 5 to 600. The default is 180. The unit is second
t303 value Time out value starting from the point Q.931 message
received until CONNECT message is received. The value
ranges from 5 to 60. The default is 8. The unit is second
tras value The time out value starting from the point that RAS message
is received until the message is replied. The value ranges
from 2 to 30. The default is 6. The unit is second.
tttl value Time out value for RAS time-to-live. The default is 60. The
unit is second. The value is renewed by gatekeeper.
tidt value Inter-digit time out for digit entry to voice port. The value
ranges from 1 to 600. The default is 10. The unit is second.
treg value Timeout for registration retry to gatekeeper. The value ranges
from 10 to 600. The default is 30. The unit is second.
treg2 value When registration to gatekeeper fails (RRJ), it is not switched
to back up gatekeeper. Timeout value for registration retry to
the main gatekeeper. The registration value ranges from 10 to
86400. The default value is 120. The unit is second.
tohd value The time out value for on hook to voice port. The value
ranges from 10 to 30. The default is 0. The unit is second
tpoll value Polling timeout value. The value ranges from 10~86400. The
default is 180. The unit is second.
tterm value Time out value for call duration of voice port. The value
ranges from 10~86400. The default is infinite. The unit is
second.
3.10.6.31.2. Command Default
Refer to the table above for the default values