Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 37 / 416-
qos-control Specify a value of QoS traffic control of a designated interface.
shutdown Perform the administrative down to a designated interface
speed Specify a physical speed of a designated link
2.2.4.2. Ethernet interface Commands 2 (IP/IPv6
Configuration Mode)
IP related commands can be configured from the assigned interface. The prompt can be shown
as product model name (config-if)#. The commands listed below can be shown by using
(config-if)# ip ?.
Command Description
access-group
Apply the access-list, which has been configured from global
configuration mode, to an interface
accounting Apply IP Account List to a designated interface
address Change or configure IP/IPv6 address for a designated interface
dhcp Specify DHCP configuration for interface
exit Return to the previous configuration mode
nat Enter NAT interface configuration mode
nd Specify a default value for Pv6 ND (Neighbor Discovery)
mtu Configure IP MTU of a designated interface
policy Configure an ip route-map
policy-group Set the policy which has been applied to a designated interface
route-cache
Specify an option whether to apply route-cache to a designated
interface
tcp Specify a MSS value of TCP header
2.2.4.3. Ethernet interface Commands 3 (PPP Configuration
Mode)
This is the command to be configured for the designated interface with ppp encapsulation from