Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 361 / 416-
3.10.6.24. signaling-port
To change q931 signaling port (default TCP 1720) which is used in H.323, use signaling-port
command. Since TCP port 1720, which is used in Q931, is a well know port. To change this
port, only the gateways with the same settings can be set up. Therefore, If you use this set up, a
general gateway loose its interoperability and it requires an attention.
signaling-port port-number
no signaling-port
3.10.6.24.1. Syntax
Keyword / Argument Description
Signaling-port Sets up TCP port
Save the settings after changing to the other port then reboot.
3.10.6.24.2. Command Default
TCP port 1720
3.10.6.24.3. Command Modes
Gateway configuration
3.10.6.24.4. Usage Guidelines
Use this command to change Q931 signaling port, which is not in use.
3.10.6.24.5. Examples
The following example changes signaling port to 1004(TCP).
gateway
signaling-port 1004