Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 348 / 416-
3.10.6.15. gkip
To specify a gatekeeper to be registered to the gateway, use gkip in gateway configuration
mode. To delete a particular gatekeeper from gatekeeper list, use the no form of this command.
gkip ip-addr [port] [priority]
no gkip ip-addr
3.10.6.15.1. Syntax
Keyword / Argument Description
ip-addr Transmits gatekeeper discovery message to the specified
address
port (Optional) Specifies UDP port of gatekeeper. The default is
1719.
priority (Optional) Specifies a priority to many alternate gatekeeper.
The value ranges from 0 to 254. Lower the number, higher
the priority is. The default priority is 128
3.10.6.15.2. Command Default
128 in priority
3.10.6.15.3. Command Modes
Gateway configuration
3.10.6.15.4. Usage Guidelines
Registering to gatekeeper, the AddPac Voice Finder Gateway can take number and billing
services. The AP1000 Gateway specify up to 10 gatekeepers. When more than one gatekeeper
is specified, the gateway registers the gatekeeper in a priority order by using GRQ message.
Only one gatekeeper can registered at the same time. When registration with the gatekeeper or
receiving message fails, the gateway attempts to register the gatekeeper in a priority order.
Another way of specifying the gateway is to use alternategk list in the received message from
the registered gatekeeper. For the reference, The public gatekeeper multicast IP address
complying with H.323 is 224.0.41 and port is 1718.