Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 340 / 416-
3.10.6.10. h323 call start
To force the H.323 Version 2 gateway to use Fast Connect or Slow Connect procedures for all
H.323 calls, use the h323 call start command in voice-service configuration mode. To reset to
the default, use the no form of this command.
h323 call start { fast | slow | preferred-slow }
no h323 call start
3.10.6.10.1. Syntax
Keyword / Argument Description
fast Gateway uses H.323 Version 2 (Fast Connect) procedures.
slow Gateway uses H.323 Version 1 (Slow Connect) procedures.
preferred-slow After this setup, proceed slow start (normal start procedure)
when to send a call, receive a call from the other side,
depending on mode, proceed with fast start to slow start
procedure
3.10.6.10.2. Command Default
Fast
3.10.6.10.3. Command Modes
Voice-Service configuration
3.10.6.10.4. Usage Guidelines
This h323 call start command is configured as part of the global voice-service configuration
for VoIP services. It does not take effect unless the call start system voice-class configuration
command is configured in the VoIP dial peer.
3.10.6.10.5. Examples
The following example selects Slow Connect procedures for the gateway:
voice service voip
h323 call start slow