Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 338 / 416-
3.10.6.8. force-h245address-at-setup
To enable including H.245 address information for its procedure in SETUP message from
sending side when to start a call to H.245 no tunneling, use this command. Not to include
H.245 address information, use the no form of this command.
force-h245address-at-setup
no force-h245address-at-setup
3.10.6.8.1. Syntax
Keyword / Argument Description
This command had no arguments or keywords.
3.10.6.8.2. Command Default
Enabled
3.10.6.8.3. Command Modes
Voice Service configuration
3.10.6.8.4. Usage Guidelines
To take a definite interoperation with another gateway on the other side, use this command.
3.10.6.8.5. Examples
The following example does not include h245address information in SETUP message:
voice service voip
no force-h245address-at-setup