Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 336 / 416-
3.10.6.7. fax rate
To set rate for transmitting fax for the dial-peer, use fax rate command in voice-service
configuration mode. To reset the dial peer for voice call, use the no form of this command.
fax rate { 2400 | 4800 |7200 | 9600 | 12000 | 14400 |disable }
no fax rate
3.10.6.7.1. Syntax
Keyword / Argument Description
2400 Set fax rate to 2400bps
4800 Set fax rate to 4800bps
7200 Set fax rate to 7200bps
9600 Set fax rate to FAX 9600bps
12000 Set fax rate to FAX 12000bps
14400 Set fax rate to FAX 14400bps
disable Disables fax rate
3.10.6.7.2. Command Default
9600 bps
3.10.6.7.3. Command Modes
Voice-Service configuration
3.10.6.7.4. Usage Guidelines
To set fax transmission speed for all dial peers. Use fax rate command.
This command uses a value for only fax transmission speed and has no effect fax quality. 높은
The fax with high speed is transmitted as fast as 14400bps and even faster but it takes a
significantly large bandwidth. The fax with low transmission speed is transmitted as slow as
2400bps, it takes a relatively small bandwidth.
This command is applicable only with T.38 fax relay. If the value is set to fax rate disable then
T.38 fax relay does not work.
If the actual fax rate is set to 9600bps, the actual fax rate can be negotiated as 9600bps, even
this command sets T.38 to 1440 bps.