Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 331 / 416-
3.10.6.3. codec preference
To place a voice port into the busyout monitor state, enter the busyout monitor command in
voice-port configuration mode. To remove the busyout monitor state from the voice port, use
the no form of this command.
busyout monitor {callagent| gatekeeper| sip-server| voip-interface}
no busyout monitor
3.10.6.3.1. Syntax
Keyword / Argument Description
callagent Monitors the binding state with MGC
gatekeeper Monitors the binding state with gatekeeper
sip-server Monitors the binding state with proxy
voip-interface Monitors the up/down state of VoIP interface
3.10.6.3.2. Command Default
The voice port does not monitor any interfaces.
3.10.6.3.3. Command Modes
Voice Service voip configuration
3.10.6.3.4. Usage Guidelines
The gateway provides busyout monitor service for the configuration of which PSTN transfers
automatically, when a call can not be delivered due to a network failure or an abnormal state of
communication with Gatekeeper/SIP-Proxy/MGC.
The related setting of callagent/gatekeer/sip-server/voip-interface can be configured repeatedly
3.10.6.3.5. Examples
The following example monitors the binding state of the voip-interface with the gatekeeper.
voice service voip
busyout monitor gatekeeper
busyout monitor voip-interface