Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 33 / 416-
2.2.3. Configuration Mode Commands
Only the user with the root can access to the configuration mode. In this mode, the user can
change the configuration. Largely the mode can be divided by the interface and general
configuration mode.
The prompt of the general configuration mode can be displayed as ‘product model name
(config)#’. In this mode, the user can configure all the settings except the ones related to
interface. In the interface mode, the user can configure the settings related to interface such as
IP address, WAN protocol.
The prompt of the interface configuration mode can be displayed as ‘product model name
(config-if)’.
2.2.3.1. General Configuration (config) Commands
Command Description
access-list
Creates access-list. The range of #1~99 is the standard
access-list and #100~199 is the extended access list. Also
the expanded range can be supported.
application
Configures the VoIP call termination cause value
mappings.
arp
Deletes and adds a particular Ethernet address from ARP
table. Also performs ARP table.
auto-upgrade
Sets to download the firmware and script file by using
HTTP.
bridge Configures the settings related to bridge.
call-diversion Configures call-division.
cdp Global CDP configuration subcommands
clock Configures System Time of the gateway
console Sets the serial console
controller Configures the settings for E1/ T1 interfaces
dhcp Configures settings for DHCP server and relay