Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 32 / 416-
2.2.2. Administrator Mode Commands
The administrator mode command is used for the administrator only who logs into the gateway.
To use this command, you must log in to the gateway by the root account. An entrance to the
configuration of the gateway is possible only when you log in as administrator mode.
At the administrator, all the commands in the user mode can be used.
The prompt for the administrator mode can be displayed as ‘(product model)#’.
Command Description
auto-upgrade Sets to upgrade the image by using HTTP
clear Initializes the initial counter and statistics
clock Sets the present year, date and time
configure Enters to the configuration mode
copy Copies running config to startup config
debug Debugs the overall system
disable Enters to the user mode
disconnect Closes VTY connection
dnsquery Used for DNS Query test
dnsrv Used for DNS SRV Record Test
end Enters to the administrator mode
erase Deletes config file
exit Moves to a notch previous mode from the present
fsh Enter File Shell
help Displays APOS help screen
no Deletes the present configuration
nsupdate Transmits updated information to Name Server
ntpdate Receives the clock information from ntp server
ping Checks the network connection (IPv4)
ping6 Checks the network connection (IPv6)
quit Equals to exit
reboot Reboots the system
show Checks the present status of the configuration
telnet Connects remotely
terminal Sets to display the terminal and debussing information
tftp Transmits the file by tftp
traceroute Checks the route (IPv4)
traceroute6 Checks the route (IPv6)
who Displays a user’s information who is currently connected
whoami
Displays a user’s information for a terminal who is currently
connected
write Saves the present configuration