Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 288 / 416-
3.10.4.23. call-wafting
To enable call waiting, use the call-waiting command in interface configuration mode. To
disable call waiting, use the no form of this command.
call-waiting
no call-waiting
3.10.4.23.1. Syntax
Keyword / Argument Description
This command has no arguments or keywords.
3.10.4.23.2. Command Default
Disabled
3.10.4.23.3. Command Modes
Dial peer configuration
3.10.4.23.4. Usage Guidelines
Alerts the phone user to incoming call while the phone user is on another call. Call waiting
provides an audio alert and displays incoming call information (visual alert) on the phone
screen. When the user press hook-flash-button of the telephone, the previous is place in hold state
and connects to a new call.
If you press hook-flash button one more time, the call returns to the previous user. The feature of
switch-to-pstn-on-call and switch-to-voip-on-call are to be disabled when to use this feature in the
VoiceFinder Gateway Series with PSTN back-up port-AP200, AP1000 and AP160.
This feature is supported by SIP only.
3.10.4.23.5. Examples
The following example shows how to configure call waiting:
dial-peer voice 10 pots
call-wafting