Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 282 / 416-
3.10.4.20. user-name
When to use SIP proxy, you need authentication, the SIP proxy requests for
“WWW-Authenticate Digest”
At this time, user-id and user-name are configured same without setup.
To send user-id and user-name differently for the SIP proxy, use this command.
Use use-name command in dial-peer configuration mode.
If you want use user-name and user-id same, use the no form of this command.
user-name string
no user-name
3.10.4.20.1. Syntax
Keyword / Argument Description
sting An user ID that is registered to SIP Proxy.
3.10.4.20.2. Command Default
The user-name information configured in dial peer at default is set up same as
destination-pattern <string>.
3.10.4.20.3. Command Modes
Dial peer
3.10.4.20.4. Usage Guidelines
Use user-name for registering and authenticating each dial peer. Think of each dial peer in
UA(User Agent) concept.
If authentication of the AddPac VoiceFinder Gateway Series requires only one user-name, use
sip-username in SIP-UA configuration mode rather than this command
The user-name is necessary information for REGISTER which requires authentication. If
user-id and user-name are same, you do not have to configure.