Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 281 / 416-
3.10.4.19. voice-class codec
To assign a previously configured codec selection preference list (codec voice class) to a Voice
over IP (VoIP) dial peer, enter the voice-class codec command in dial peer configuration mode.
To remove the codec preference assignment from the dial peer, use the no form of this
command.
voice-class codec tag
no voice-class codec tag
3.10.4.19.1. Syntax
Keyword / Argument Description
tag Unique number assigned to the voice class. Range is from 1
to 65533. The tag number maps to the tag number created
using the voice class codec global configuration command.
3.10.4.19.2. Command Default
Dial peers have no codec voice class assigned.
3.10.4.19.3. Command Modes
Dial peer configuration
3.10.4.19.4. Usage Guidelines
You can assign one voice class to each VoIP dial peer. If you assign another voice class to a
dial peer, the last voice class assigned replaces the previous voice class.
3.10.4.19.5. Examples
The following example shows how to assign a previously configured codec voice class to a dial
peer:
dial-peer voice 100 voip
voice-class codec 10