Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 278 / 416-
3.10.4.17. translate-outgoing
To apply a translation rule to manipulate dialed digits on an outbound POTS or VoIP call leg,
use the translate-outgoing command in dial peer configuration mode. To disable the
translation rule, use the no form of this command.
translate-outgoing { called-number | calling-number } tag
no translate-outgoing { called-number | calling-number }
3.10.4.17.1. Syntax
Keyword / Argument Description
called-number
Apply translation rule to the outbound called party number.
calling-number
Apply translation rule to the outbound calling party number.
tag Tag number by which the rule set is referenced. This is an
arbitrarily chosen number. Range is 1 to 2147483647. There
is no default value.
3.10.4.17.2. Command Default
No default behavior or values
3.10.4.17.3. Command Modes
Dial peer configuration
3.10.4.17.4. Usage Guidelines
This command applies to both POTS peers and VoIP peer. Use translation-rule command to
configure the number translation rule set.
3.10.4.17.5. Examples
The following example creates a translation rule set 10, and then applies to the calling part
number of dial-peer 200. so if the calling party number of the outbound call is 93450, then
translates to 9563450.
translation-rule 10
rule 0 9 956