Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 275 / 416-
3.10.4.14. session target
To designate a network-specific address to receive calls from a VoIP dial peer, use the session
target command in dial peer configuration mode. To reset to the default, use the no form of this
command.
session target destination-address
no session target
3.10.4.14.1. Syntax
Keyword / Argument Description
destination-address IP address of the dial peer to receive calls.
3.10.4.14.2. Command Default
No default behavior or value.
3.10.4.14.3. Command Modes
Dial peer configuration
3.10.4.14.4. Usage Guidelines
Use this command to specify a network-specific destination for a dial peer to receive calls
from the current dial peer. You can select an option to define a network-specific address or
domain name as a target, or you can select one of several methods to automatically determine
the destination for calls from the current dial peer.
3.10.4.14.5. Examples
The following example creates a session target with IP address 211.238.1.1
dial-peer voice 10 voip
session-target 211.238.1.1