Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 272 / 416-
3.10.4.12. prefix
To specify the prefix of the dialed digits for a dial peer, use the prefix command in dial peer
configuration mode. To disable this feature, use the no form of this command.
prefix string
no prefix
3.10.4.12.1. Syntax
Keyword / Argument Description
string
Integers that represent the prefix of the telephone number
associated with the
specified dial peer. Valid values are 0 through 9 and a comma
(,). Use a
comma to include a pause in the prefix.
3.10.4.12.2. Command Default
Null String
3.10.4.12.3. Command Modes
Dial peer configuration
3.10.4.12.4. Usage Guidelines
Use this command to specify a prefix for a specific dial peer. When an outgoing call is initiated
to this dial peer, the prefix string value is sent to the telephony interface first, before the
telephone number associated with the dial peer.
If you want to configure different prefixes for dialed numbers on the same interface, you need
to configure different dial peers.
3.10.4.12.5. Examples
The following example specifies a prefix of 9 and then a pause for 1 second:
dial-peer voice 10 pots
prefix 9,