Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 270 / 416-
3.10.4.11. preference
To indicate the preferred order of a dial peer within a hunt group, use the preference command
in dial peer configuration mode. To remove the preference, use the no form of this command.
preference value
no preference
3.10.4.11.1. Syntax
Keyword / Argument Description
value
Integer from 0 to 10, where the lower the number, the higher
the preference.
Default is 0 (highest preference).
3.10.4.11.2. Command Default
0 (highest preference)
3.10.4.11.3. Command Modes
Dial peer configuration
3.10.4.11.4. Usage Guidelines
Setting the preference within a hunt group enables adjustment of the preference for a specific dial peer.
3.10.4.11.5. Examples
The following example shows the dial peer:
dial-peer voice 10 pots
destination-pattern 5551234
preference 3
dial-peer voice 11 pots
destination-pattern 555....
preference 0
The above settings describes that when the called party number 5551234 of the inbound, all the