Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 269 / 416-
3.10.4.10. port
To associate a dial peer with a specific voice port, use the port command in dial peer
configuration mode. To cancel this association, use the no form of this command.
port port
no port
3.10.4.10.1. Syntax
Keyword / Argument Description
port
Voice port number. Valid entries are 0 and 7.
3.10.4.10.2. Command Default
No default behavior or value.
3.10.4.10.3. Command Modes
Dial peer configuration
3.10.4.10.4. Usage Guidelines
This command is used for calls that come from a telephony interface to select an incoming
dial peer and for calls that come from the VoIP network to match a port with the selected
outgoing dial peer. This command applies only to POTS peers.
This command chooses the incoming dial-peer for the incoming call to the telephone
interface and matches with the chosen port number of the outbound dial peer with the
incoming call from VoIP network.
3.10.4.10.5. Examples
The following example associates the dial peer with the voice port:
dial-peer voice 10 pots
port 1