Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 266 / 416-
3.10.4.8. forward-digits
To specify which digits to forward for voice calls, use the forward-digits command in dial peer
configuration mode. To specify that any digits not matching the destination-pattern are not to be
forwarded, use the no form of this command. To reset to the default, use the default form of
this command.
forward-digits { from | last } number
no forward-digits
3.10.4.8.1. Syntax
Keyword / Argument Description
from
Forwards all the digits of the called party number, which are
specified by number .
last
Forward the digits in a number which are counted from the
last digit.
number The number of digits to be forwarded. If the number of digits
is greater than
the length of a destination phone number, the length of the
destination
number is used. Range is 0 to 32. Setting the value to 0 is
equivalent to
entering the no forward-digits command.
3.10.4.8.2. Command Default
Dialed digits not matching the destination pattern are forwarded
3.10.4.8.3. Command Modes
Dial peer configuration (POTS peer)
3.10.4.8.4. Usage Guidelines
This command applies only to POTS dial peers. This command specifies a number of digits for
relaying the last part of the called party number of the inbound call to the called party number of
the outbound. The destination pattern includes both explicit digits and wildcards if present. Use
the default form of this command if a no default digit-forwarding scheme was entered previously
and you wish to restore the default.