Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 262 / 416-
3.10.4.6. display-name
To include a registered user ID in INVITE message, use display-name command. To reset to
the default, use the no form of this
display-name string {non-quoted|<cr>}
no display-name
3.10.4.6.1. Syntax
Keyword / Argument Description
string Add a registered user to from field of INVITE
- non-quoted: output the same setup value as input
- <cr>: Output the setup value “string” form
3.10.4.6.2. Command Default
No default behavior or value.
3.10.4.6.3. Command Modes
Dial peer configuration
3.10.4.6.4. Usage Guidelines
To verify the use id, which has been used for authentication, with actual number in INVITE
message in a particular proxy, use this command.
The user id used for authentication represented in From field of INVITE message. Also the id
can be represented in To field by using to-display-name command.
The AddPac VoiceFinder Gateway Series basically use E.164 for registration try and
authentication. To use the value, which is entered directly, instead of E.164 used for
authentication, use user-name command from pots-peer command first for the configuration?
3.10.4.6.5. Examples
.The following example registers the user id as ‘addpac_user’ instead of E.164 in pots-peer 0
and delivers INVITE message including the user id.