Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 255 / 416-
For calls that come in from a plain old telephone service (POTS) interface, the answer-address command
is not used to select an incoming dial peer. The incoming POTS dial peer is selected on the basis of the
port configured for that dial peer.
There are certain areas in the world (for example, certain European countries) where valid telephone
numbers can vary in length. Use the optional control character T to indicate that a particular
answer-address value is a variable-length dial string. In this case, the system does not match the dialed
numbers until the interdigit timeout value has expired.
3.10.4.1.5. Examples
The following example shows the calling party number of the inbound VoIP 555-0104 as the VoIP peer
10 of an incoming call being configured:
dial-peer voice 10 voip
answer-address 526....