Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 252 / 416-
3.10.3.21. translate-incoming
To apply a translation rule to manipulate dialed digits on an inbound POTS call leg, use the
translate command in voice-port configuration mode. To remove the translation rule, use the
no form of this command.
translate-incoming { called-number | calling-number } tag
no translate-incoming { called-number | calling-number }
3.10.3.21.1. Syntax
Keyword / Argument Description
called-number
Translation rule applies to the inbound calling party number.
calling-number
Translation rule applies to the inbound called party number.
tag Tag by which the rule set is referenced. Range is from 0 to
65535. There is no default value.
3.10.3.21.2. Command Default
No default behavior or values
3.10.3.21.3. Command Modes
Voice-port configuration
3.10.3.21.4. Usage Guidelines
To apply a translation rule to the inbound call of voice-port, use translation-rule command.
When the translation rule applies to the called party number, it checks whether the translation
takes a place every time, the number information is entered to the voice port in the order. At this
time, the number translation takes a place only once.
3.10.3.21.5. Examples
The following example creates translation rule set 10 and applies it to the calling party number
of voice port 1. When the calling party number of the voice port is 93450, the translation rule
set translates if to 9563450.
translation-rule 10