Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 250 / 416-
3.10.3.20. timeout
To set a timer on a voice-port, use timeout command. To delete timer, use the no form of this
command.
timeout {tterm| tvcc}
no timeout {tterm| tvcc}
3.10.3.20.1. Syntax
Keyword / Argument Description
tterm Starts timer from the point of time when a designated
voice-port is off-hook. The call is terminated after a certain
configured time.
tvcc Voice-confirmed-connect timer is applied for the voice-port.
3.10.3.20.2. Command Default
No default behavior or value.
3.10.3.20.3. Command Modes
Voice-port configuration
3.10.3.20.4. Usage Guidelines
Once timeout tterm is set up in voice-service-voip configuration mode to limit call duration, it
is applied to all ports of the gateway for transmit/ receiving. To limit call duration on outgoing
call, you need to configure voice-port configuration mode.
In a voip configuration for passing through PBX, when a use in PBX extension (call receiver)
side acts off-hook and an actual voice is not connected, use timeout tvcc command to deliver a
disconnect message to the transmit side after a certain period of time. When PBX does not
deliver a connect message (for instance, when a user does not take a call on PBX extension
side), use this command to transmit a disconnect message after a certain time of period set by
timer (one-stage-dialing should be carried out from transmit telephone.
Set up voice-confirmed-connect command first in voice-service-voip configuration mode to use
timeout tvcc.