Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 228 / 416-
3.10.3.5. comfort-noise
To generate background noise to fill silent gaps during calls if voice activity detection (VAD) is
activated, use the comfort-noise command in voice-port configuration mode. To provide
silence when the remote party is not speaking and VAD is enabled at the remote end of the
connection, use the no form of this command.
comfort-noise
no comfort-noise
3.10.3.5.1. Syntax
Keyword / Argument Description
This command has no arguments or keywords.
3.10.3.5.2. Command Default
Comfort noise is generated and enabled by default.
3.10.3.5.3. Command Modes
Voice-port configuration mode
3.10.3.5.4. Usage Guidelines
Use the comfort-noise command to generate background noise to fill silent gaps during calls if
VAD is activated. If the comfort-noise command is not enabled, and VAD is enabled at the
remote end of the connection, the user hears dead silence when the remote party is not speaking.
The configuration of the comfort-noise command affects only the silence generated at the local
interface; it does not affect the use of VAD on either end of the connection or the silence
generated at the remote end of the connection.
3.10.3.5.5. Examples
The following example disables comfort noise on voice-port 1
voice-port 1
no comfort-noise