Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 222 / 416-
3.10.2.17. voip-interface
To specify VoIP interface, use voip-interface command in global configuration mode. To restore
the default selection order, use the no form of command.
voip-interface <ip/ipv6><interface-name><slot number><port number>
no voip-interface <ip/ipv6>
3.10.2.17.1. Syntax
Keyword / Argument Description
interface-name Specify an interface of the gateway. The interface names re
Ethernet 0.0, Ethernet 1.0, Serial 0 and others
3.10.2.17.2. Command Default
FastEthernet 0 /0 is the default interface
3.10.2.17.3. Command Modes
global configuration
3.10.2.17.4. Usage Guidelines
This command specifies a particular VoIP interface. The interface uses the specified interface
for VoIP service. If IP address is not specified, checking VoIP related setting and details is not
possible.
3.10.2.17.5. Examples
The following example specifies VoIP service to ethernet 1.0 interface.
configure
voip-interface ip FastEthernet 1/0
The following example specifies VoIP service to FastEthernet 0/0 IPv6 interface:
Configure terminal
voip-interface ipv6 FastEthernet 0/0