Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 216 / 416-
no voice class user tag
3.10.2.14.1. Syntax
Keyword / Argument Description
tag Assigns a unique number to voice class user. The valid entry
ranges from 0 to 10. Only one tag exists in each gateway
system
3.10.2.14.2. Command Default
No default behavior or value.
3.10.2.14.3. Command Modes
Global configuration mode
3.10.2.14.4. Usage Guidelines
User-class rejects receiving a call from unauthorized user when the outgoing signal of FXO is
received in the network. If user-class is not configured and a user makes a call attempt on FXO
port through the network, then the user is connected to an extension of PBX and listens to a dial
tone.
The use enters the digits of the extension number afterwards. If FXO is connected to PSTN, the
user listens to a dial tone generated by PSTN switch, and then enters the other party’s number of
PSTN.
If use class is configured, the user may hear a beep sound instead of a dial tone. If the user
passes a password entry, the number can be entered as many as the max-digits which is
explicated in the user-class (depending on the transmit side of the gateway, the beep sound may
not be heard). Therefore, adjust a number of max-digit for extension calls, local calls, toll calls
and international calls.
More than one user-class is possible, so it can place limits on other user-classes which are
different to each other.
This command and security permit-FXO command provides security for the incoming call
directing FXO port through the network. Such security is necessary for the incoming call to
FXO, because a direct call attempt to PSTN is possible through FXO port and an indirect call
attempt through PBX extension to PSTN are possible for a misuse of an unauthorized remote
user.