Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 214 / 416-
no voice class codec tag
Keyword / Argument Description
tag Unique number that you assign to the voice class.
Range is from 1 to 65,535.
3.10.2.13.1. Command Default
No default behavior or value.
3.10.2.13.2. Command Modes
global configuration
3.10.2.13.3. Usage Guidelines
This command only creates the voice class for codec selection preference and assigns an
identification tag. Use the codec preference command to specify the parameters of the voice
class, and use the voice-class codec dial-peer command to apply the voice class to a VoIP dial
peer.
3.10.2.13.4. Examples
The following example shows how to enter voice-class configuration mode and assign a voice
class tag number starting from global configuration mode:
voice class codec 10
After you enter voice-class configuration mode for codec, use the codec preference command
to specify the parameters of the voice class.
The following example creates preference list 99, which can be applied to any dial peer:
Configure terminal
voice class codec 99
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729
codec preference 4 g7231r63