Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 205 / 416-
dial-peer voice number {voip/pots}
3.10.2.7.1. Syntax
Keyword / Argument Description
number The number to define a specific dial peer. Valid entry
ranges from 0~65535.
voip This is the command to indicate the dial peer as VoIP
peer using voice encapsulation.
pots This is the command to indicate the dial peer as POTS
peer using voice encapsulation in IP backbone
3.10.2.7.2. Command Default
No default behavior or value.
3.10.2.7.3. Command Modes
global configuration
3.10.2.7.4. Usage Guidelines
Use the dial-peer voice global configuration command to switch to dial-peer configuration
mode from global configuration mode and to define a particular dial peer. Use the exit
command to exit dial peer configuration mode and return to global configuration mode.
3.10.2.7.5. Examples
The following example specifies POTS peer to dial-peer 10
Configure terminal
dial-peer voice 10 pots
3.10.2.8. gateway
To enter gateway configuration mode, use the gateway command in global configuration mode.
To deregister the gateway from the gatekeeper, use the no form of this command.
gateway
no gateway