Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 203 / 416-
command in global configuration mode. To restore the default terminating character, use the no form of this
command.
dial-peer terminator character
no dial-peer terminator character
3.10.2.6.1. Syntax
Keyword / Argument Description
character Designates the terminating character for a
variable-length dialed number.
The valid characters are #, *.
3.10.2.6.2. Command Default
Character (#)
3.10.2.6.3. Command Modes
global configuration
3.10.2.6.4. Usage Guidelines
There are certain areas in the world (for example, in certain European countries) where
telephone numbers can vary in length. When a dialed-number string has been identified as a
variable length dialed-number, the system does not place a call until the configured value for
the timeouts interdigits command has expired or until the caller dials the terminating character.
Use the dial-peer terminator global configuration command to change the terminating
character. To disable the terminator, use dial-peer terminator n command.
3.10.2.6.5. Examples
The following example shows that “#” has been specified as the terminating character for
variable-length dialed numbers:
configure terminal
dial-peer terminator #