Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 199 / 416-
3.10.2.4. dial-peer hunt
To specify a hunt selection order for dial peers, use the dial-peer hunt command in global configuration
mode. To restore the default selection order, use the no form of this command.
dial-peer hunt hunt-order-number
no dial-peer hunt
3.10.2.4.1. Syntax
Keyword / Argument Description
hunt-order-number
Apply a priority order algorithm from o to 7
0 – (default) longest match, explicit preference, random
1 - longest match, explicit preference, sequential
2 - explicit preference, longest match, random
3 - explicit preference, longest match, sequential
4 – sequential, longest match, explicit preference
5 - sequential, explicit preference, longest match
6 – random
7 - sequential
3.10.2.4.2. Command Default
0 – longest match, explicit preference, random
3.10.2.4.3. Command Modes
global configuration
3.10.2.4.4. Usage Guidelines
Selection of outbound POTS or VoIP dial peer, which is sent out of the gateway, can be
accomplished by comparing called party number of the inbound call to destination pattern of
dial peer.
At this time, more than one dial peer, which is coincided with called party number, is called
hunt group and attempts to make calls according to the priority order based on the consistent
policy.
In other words for the case of VoIP peer, When the call attempt fails due to network connection
fail, gatekeeper reject, another call attempt can be made by other dial peers in the hunt group.
In case of POTS peer, when the attempt is failed due to the port being busy of the voice port,
another call attempt can be made to another dial peer in the hunt group.