Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 198 / 416-
3.10.2.3. dial-peer call-transfer
To transfer a busy call to the other port, use dial-peer call-transfer command in global
configuration mode. To restore the default selection order, use the no form of command.
dial-peer call-transfer character
no dial-peer call-transfer
3.10.2.3.1. Syntax
Keyword / Argument Description
character Specify call transfer, The value could be h, or n.
- h (hook-flash) : Transfer the present cal by pressing
hook-flash
- n (not assigned) : Not to use transfer as the same
command as no dial-peer call-transfer
3.10.2.3.2. Command Default
Character (n)
3.10.2.3.3. Command Modes
global configuration
3.10.2.3.4. Usage Guidelines
This command is used for transferring a busy call to the other number. Enable call-hold first because the
feature interworks with call-hold.
3.10.2.3.5. Examples
The following example sets hook-flash to call transfer
dial-peer call-transfer h