Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 196 / 416-
3.10.2. Global Configuration Commands
3.10.2.1. dial-peer call-hold
To use call-hold command in global configuration mode to place a hold for VoIP call. To
restore the default selection order, use the no form of command.
dial-peer call-hold character
no dial-peer call-hold
3.10.2.1.1. Syntax
Keyword / Argument Description
character Specify call-hold. The texts can be used are h, n.
- h(hook-flash) : Hold the present call by pressing
hook-flash
- n(not assigned) : not using hold as the same
command as no dial-peer call-hold
3.10.2.1.2. Command Default
Character (n)
3.10.2.1.3. Command Modes
Global configuration
3.10.2.1.4. Usage Guidelines
Place a hold on the present call and use for other operation (taking a new call or start a new
call). This command is used for passing the present call to the other number by interworking
with call-transfer.
3.10.2.1.5. Examples
The following example configures to use hook-flash to call-hold.
dial-peer call-hold h
dial-peer call-hold h