Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 185 / 416-
voice service voip configuration mode. This Fast Start mode is set as default and slow start
mode disables H245 Tunneling and Fast Start when to set up H245.
At all start modes, the H.245 procedure is proceeded to find out the other party’s capability
(T.38, DTMF relay capability).
Step Commands Purpose of Usage
1
model name# configure terminal Enter global configuration mode
2
model name(config)# voice service voip Enter voice service voip configuration
mode
3
Router(vservice-voip)# h323 call start
{fast | slow| preferred-slow }
Set up fast or slow start mode
3.8.3. Configuring SIP User Agent
The gateway can be supported with registration and call control (registration, INVITE,
Security) features through interaction with SIP proxy server. This VoIP gateway can set a static
IP address to VoIP peer to operate without the proxy server. Also, interoperating with SIP proxy
server, it can call to other side without knowledge of IP address of the other side.
To carry register this gateway, user name, password and e164 of the gateway are required and
the ID must be a unique identifier. When you need this ID, you can set up by using
sip-username and sip-password in gateway SIPUA configuration mode and destination
number of POTS peer commands. If you want each authentication for e.164 number for each
dial-peer, use the same commands as in dial-peer. You must take precaution not to set SIP-UA
related commands. You may ignore the settings of dial-peer, if sip-username and
sip-password are set in SIP-UA and dial-peer
Use sip-server command to specify SIP Proxy Server for the gateway. By using sip-server,
more than one SIP server can be addressed and registration is attempted to set in a priority order.
Only one SIP server can be registered at the same time.
To cancel registration of SIP server in SIP-UA configuration mode, use no register command.
Step Commands Description
1
model name# configure terminal Enter configuration mode
2
model name(config)# sip-ua Enter SIP User Agent configuration
mode and register the gateway to the
SIP proxy server
3
model name(config-sip-ua)# sip-server
server-ip-address or domain name or
sip-server-ipv6-address [port] [priority]
Specify SIP Server ip address
4
model name(config-sip-ua)# sip-username
user-id
Specify sip user id of the gateway