Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 182 / 416-
3.7.3. ntp
VoiceFinder Gateway Series of AddPac Technology products support Network Time Protocol.
This command is to set the gateway time to network time server same by taking the time
information from a time server of the network.
This feature is basically disabled, but to enable ntp related settings, use script ntpdate
WORD command. To disable it, use no script ntpdate WORD command to delete ntp
related settings.
Step Commands Description
1
model name# configure terminal Enter configuration mode
2
model name(config)# script ntpdate WORD Enter script mode to set NTP options
3
model name(config-script)# server ip <ip
address>
Add server address
3.7.4. snmp
The AddPac VoiceFinder Gateway Series can perform the work of SNMP agent.
A remote equipment can access to the gateway by using SNMP and use the feature.
This feature is disabled at default. To enable, use snmp server command and to return to the
default, use no snmp server command.
If a user wants to change snmp port information of the gateway, then service-port feature can be
used.
When to change, snmp port <TCP/UDP Server Port> command is used, to use SNMP
port(161) at default, use snmp port 161 or no snmp port command.
Step Commands Description
1
model name# configure terminal Enter configuration mode
2
model name(config)# snmp server Enable SNMP agent
3
model name(config)# snmp port <port number> Change to the designated SNMP port by
user
4
model name(config# exit Ends configuration