Specifications

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 178 / 416-
4 isdn {n303 | t303 | t310} value
This command is used for timer and counter from
ISDN PRI protocol
z N303 : SETUP retry counter
z T303 : The time out value until reply message is
received after transmitting SETUP message
z T310 : The time out value until the next message
is received after receiving CALL
PROCEEDING message
5 isdn virtual-connect
Under ISDN PRI enbloc case, this option enables
routing by user’s DTMF entry before end-to-end
connection.
3.5.4. Configuring R2
R2 related setting is listed as to follow:
Step Commands Purpose of Usage
1 configure terminal
Enter global configuration mode
2 controller e1 location
Enter the specified controller configuration mode.
Indicate location as slot-number/port-number
3 r2 get-calling-number
Configure this command to receive calling party
number for R2